Dewalt DW3112 10-Inch 24-Tooth ATB Saw Blade Review
Shark Pro-series 8-1/4 inch 40 Teeth Carbide 5/8" arbor hole DKO Thin Kerf ATB Miter Saw Blade "Ship FREE buy +" Review
Shark Pro-series (50-Pack) 7-1/4 inch 24 Teeth Carbide 5/8" arbor hole DKO Thin Kerf ATB Circular Saw Blade Review
Zenport® SB375 (Box of 12) Bow Saw 15" Blade Review
Fein 6-35-02-144-02-0 Metal Flush Cut Blade, 5-Pack Review
Norton 2786 7-Inch Segmented Diamond Saw Blade with 7/8-Inch Arbor and 5/8-Inch Insert for Masonry Review
Forrest WW10307125 Woodworker II 10-Inch, 30 Tooth, 5/8-Inch Arbor, 1/8-Inch Kerf Circular Saw Blade Review
Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its blades by offering a sharpening service that brings blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new.
The No-Melt carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. No-Melt blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low-melt nylons. Specially engineered side clearances on the carbide teeth significantly reduce -- and in many cases, totally eliminate -- any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with double-hard and 40 percent stronger C4 carbide, so you can expect 50 to 300 percent longer life between sharpenings. Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. The NO-MELT carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. NO-MELT blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low melt nylons. Specially engineered side clearances on the carbide teeth significantly reduced and in many cases, totally eliminate any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with DOUBLE-HARD and 40% stronger #C4 Carbide. 50% to 300% Longer Life Between Sharpenings, Reduced Yearly Sharpening Costs, Less Machine Downtime, Improved Labor Efficiency, Inventory Savings -- Fewer Blades Required.10-inch circular saw blade with a 5/8-inch arbor, 1/8-inch kerf, and a 30-tooth designCuts in all directions- rip, cross-cut, miter, any depth; cuts all sized grooves 1/4 inch through 29/32-inch incrementsSuper-hard carbide gives up to 300% longer life; works especially well on plywoods and abrasive particle-boardsSet of plastic adjusting shims includedWeighs 2.3 pounds shipped
Versa-Tool DB10B 1-3/4-Inch Bi-Metal Universal Oscillating Saw Blade For Dremel Multi-Max, 10 Pack Review
Tool Aid (SGT90010) 18 TPI 4" All Purpose Reciprocating Air Saw Blades 5 Per Pack Review
Forrest MM10106 Miter Master 10-Inch 100 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood Cutting Circular Saw Blade Review
Hitachi 725206 10-Inch 72 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor Review
Freud LU84R011 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review
| |||||||||||||||||||||||||
 | ||||
 | ||||
|
This blade is designed for optimal performance when crosscutting materials that are 3/4 to 3-1/2 inches thick or ripping materials that are 3/8 to 1-1/2 inches thick. It makes quick work of hard- and softwood, plywood, and chipboard. It can also handle laminates or tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a .126 kerf.
Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.
High-Density Carbide for Maximum Cutting Performance
This combination saw blade's 50 teeth are finished with tips made from Freud's application- specific TiCo high-density carbide "combination blend." Formulated to help the blade maintain a sharp cutting edge for longer when faced with a variety of applications, this blend includes just a little bit more high-density tungsten carbide than other TiCo blends. And it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.
With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.
Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.
As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.
This industrial saw blade is backed by Freud's limited lifetime warranty.
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.
By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.
What's in the Box
Freud LU84R011 Combination Saw Blade--10-inch diameter, 5/8-inch arbor, 50-tooth COMBO design.
 |
About Freud LU84R Industrial Combination Blades
Freud’s industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming – which prolongs the life of the blade.
The LU84R Family
About This Product: Freud LU84R011 10-Inch 50-Tooth Combination Saw Blade
The Freud 10-Inch 50-Tooth Combination Saw Blade with Perma-Shield coating features four alternate top bevel teeth and a square raker tooth per section that lets you cut hardwoods and softwoods with a smooth, clean edge. The thick MicroGrain carbide tips allow for more cuts between sharpening, and the non-stick Perma-Shield coating reduces gumming, rusting, and corrosion. The blade features a 5/8-inch arbor and comes with a limited lifetime warranty.
Applications
The Freud LU84R011 is ideal for ripping or cross-cutting hardwoods and softwoods with a smooth, clean edge.
Key Tech Specs
Warranty
Freud saw blades are covered by a limited lifetime warranty.
LENOX 20493-B610R 6" 10TPI Wood Cutting Reciprocating Saw Blade - 25 Pack Review
Olson FR41001 Scroll Saw Blade - 7 TPI 0.1 Wide X 0.018 Thick X 5" Long - Stamped Hook Tooth - Pinned End Review
Dremel 545 Diamond Wheel Review
