Lenox 80162 64-1/2" x 1/2" x 0.025" 10/14-TPI Vari Tooth Band Saw Blade Review
Vermont American 27316 10-Inch 60T Fine Cutoff Carbide Circular Saw Blade Review
MK Morse Hole Saw AT40 2-1/2-Inch Diameter Carbide Tipped Review
DEWALT DW9158 6-1/2-Inch Cordless Construction Saw Blade Combo Pack with 18 Tooth and 24 Tooth Saw Blades Review
Hitachi 725376 2-Inch Bi-metal Curve Steel Jig Saw Blade Review
Freud LU84M016 16-Inch 80 Tooth ATBF Combination Saw Blade with 1-Inch Arbor Review
| |||||||||||||||||||||||||
 | ||||
 | ||||
|
This blade is designed for optimal performance when crosscutting materials that are 3/4 to 3-1/2 inches thick, or ripping materials that are 3/8 to 1-1/2 inches thick. It makes quick work of hard- and softwood, plywood, and chipboard. It can also handle laminates or tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a .157 kerf.
Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.
High-Density Carbide for Maximum Cutting Performance
This combination saw blade's 80 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "combination blend." Formulated to help the blade maintain a sharp cutting edge for longer when faced with a variety of applications, this blend includes just a little bit more high-density tungsten carbide than other TiCo blends. And it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.
With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.
Silver I.C.E. Coating Resists Corrosion, Heat, and Resin Buildup
This blade is finished with Freud's Silver I.C.E. coating, which resists corrosion for improved performance over time. This unique coating also resists heat buildup, protecting your saw and your work surface and preventing the blade from warping. It also helps prevent resin or "pitch" buildup.
Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup means longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.
This industrial saw blade is backed by Freud's limited lifetime warranty.
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.
By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.
What's in the Box
Freud LU84M016 Combination Saw Blade--16-inch diameter, 1-inch arbor, 80-tooth COMBO design.
 |
Metabo 623676000 3-Inch Progressive HSS Pionier Jig Saw Blades, 5-Pack Review
Barnel Z270 10.5-Inch Folding Curved Blade Landscape Pruning Hand Saw Review
Proxxon 28734 80mm Carbide Tipped Saw Blade for FKS/E 24-Teeth Review
Freud LU73M018 18-Inch 108 Tooth ATB Cabinetmaker's Crosscutting and Ripping Saw Blade with 1-Inch Arbor Review
| |||||||||||||||||||||||||
Depth of Cut | ||||
 | ||||
|
It's designed for optimal performance when crosscutting hard or soft woods, or plywood and for use with materials that range from 1/2 to 2-3/4 inches thick--the materials a cabinetmaker uses most often. The blade can handle ripping wood or working with chipboard and laminate, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.157 kerf.
Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.
High-Density Carbide for Maximum Cutting Performance
This crosscutting saw blade's 108 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "crosscut blend." Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard--due to more high-density tungsten carbide than other TiCo blends--and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.
With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.
Silver I.C.E. Coating Resists Corrosion, Heat, and Resin Buildup
This blade is finished with Freud's Silver I.C.E. coating, which resists corrosion for improved performance over time. This unique coating also resists heat buildup, protecting your saw and your work surface and preventing the blade from warping. It also helps prevent resin or "pitch" buildup.
Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup means longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.
This industrial saw blade is backed by Freud's limited lifetime warranty.
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.
By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.
What's in the Box
Freud LU73M018 Cabinetmaker's Crosscutting Saw Blade--18-inch diameter, 1-inch arbor, 108-tooth design.
 |
Goldblatt G15850 Blade Runner Drywall Cutting Tool Review
Makita A-94487 72T 7-1/2-Inch Blade Review
The Makita A-94487 is a 7-1/2-Inch, 72-Tooth Carbide Tipped Blade for the LS0714 Miter Saw.
