DEWALT DW4813 6-Inch 24-TPI Straight Back Bi-Metal Reciprocating Saw Blade, Metal Trim Cuts (5-Pack) Review
Cutter's Way 5" Wet Stone/Granite Cutter/Saw with Diamond Blade Review
Freud D0436X Diablo 4-3/8-Inch 36 Tooth ATB Cordless Trim Saw Blade with 20-Millimeter Arbor and 3/8-Inch Reducer Bushing Review
Bosch 101AO 3-Inch 20-Tooth Jig Saw Blades, 5-Pack Review
Freud SD208 8-Inch Professional Dado Review
 |
 |
 |
 |
 |
These high-quality eight-inch, 12-tooth blades with 5/8-inch arbors cut dadoes and grooves that are clean, flat, and virtually splinter free. Cuts made by these blades are accurate the first time, saving you from making repeated passes over the same workpiece.
Flexibility for Cutting Hardwoods, Laminates, and More
The Freud SD208 accommodates a wide range of materials, so you can use it from project to project. And because it requires less power to feed, it is ideal for use with underpowered saws. Use it to create dadoes and grooves in hardwood, softwood, chip board, plywood, and laminate (not recommended for non-ferrous materials).
Two-Wing Chippers, Spacers, and Shim Set for Fine Adjustments
The set's included chippers/spacers (three 1/8-inch chippers and three 1/16-inch spacers) save you time and energy. With their two-wing design, they efficiently remove waste material and smooth the edges of your workpiece. Plus, they allow you to fine-tune your cuts from 1/4 to 7/8 inch, so you have accurate control over the desired width.
And with the Freud SD208's included shim set, you never have to give up making dadoes with a workpiece that's too thin to fit the width of your dado blades. This handy shim set expands the range of your kerf adjustments, giving you even greater control for achieving a flawless finished workpiece.
Anti-Kickback Design for Safe Operation
The quality of this dado set is enhanced by its anti-kickback design, which gives you an added margin of safety while you work.
MicroGrain Carbide Tips for Long-Lasting Performance
So you can get maximum performance out of this set, the blade components are constructed with Freud's TiCo Hi-Density Carbide. This means the blades can withstand numerous sharpenings and still retain their precision. And a Tri-metal Brazing process gives the blades impact resistance, so they last for the long term without dulling (a condition that can cause torn wood and uneven cuts).
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is the only manufacturer of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.
By producing its own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D208 Eight-Inch Professional Dado, two eight-inch outside blades, set of steel shims, three 1/8-inch chippers, and three 1/16-inch spacers. Storage case included.
Get Freud quality and craftsmanship in a stacked dado blade set, but at a wobble dado price! The negative hook angles make flat bottom grooves and virtually splinter-free cuts. The Pro Dado has two outside blades with five two-wing chippers which make it ideal for underpowered saws, because it requires less power to feed. All blades and chippers feature Freuds antikickback design and can be resharpened. Capable of producing grooves from 1/4" to 7/8", this dado set comes with a shim set and carrying case, as well as instructions on how to make basic dado sizes.
Diamond Blade 14" Supreme-plus Ductile Iron Steel Rebar Cutting Saw Blade 1" Arbor Review
Bosch RW66 6-Inch 6 TPI Wood Cutting reciprocating Saw Blades - 5 Pack Review
Freud LM72M010 Industrial Heavy Duty Rip Saw Blade 10-Inch by 24t Flat Top 5/8-Inch arbor Ice Coated Review
| |||||||||||||||||||||||||
Depth of Cut | ||||
 | ||||
|
The extra-large, flat teeth featured on this blade leave a smooth, splinter-free finish that eliminates the need for sanding and jointing. This large-tooth design also allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. And the large gullets between these teeth ensure easy chip removal.
Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.
High-Density Carbide for Maximum Cutting Performance
This heavy-duty rip saw blade's 24 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "ripping blend." This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the demands of ripping large quantities of thick, hard wood.
With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--once again, saving you time and money.
Silver I.C.E. Coating Resists Corrosion, Heat, and Resin Buildup
This blade is finished with Freud's Silver I.C.E. coating, which resists corrosion for improved performance over time. This unique coating also resists heat buildup, protecting your saw and your work surface and preventing the blade from warping. It also helps prevent resin or "pitch" buildup.
Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup means longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.
This industrial saw blade is backed by Freud's limited lifetime warranty.
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.
By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.
What's in the Box
Freud LM72M010 Heavy-Duty Rip Saw Blade--10-inch diameter, 5/8-inch arbor, 24-tooth design.
 |
Freud LU79R007 Perma-Shield Coated Ultimate Plywood and Melamine Saw Blade, 5/8-Inch Arbor 7-1/4-Inch by 60t Hi-ATB 38-Degree Review
| |||||||||||||||||||||||
Wall Thickness | ||||
 | ||||
|
This blade is designed for optimal performance when cutting materials that are 1/4 to 1-5/8 inches thick, including hard- and softwood, chipboard, plywood, laminates, and melamine. The blade can also handle ripping wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.079 kerf.
Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work--a feature that's especially important when working with plywood or laminates. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.
High-Density Carbide for Maximum Cutting Performance
This thin-kerf saw blade's 60 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "crosscut blend." Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard--due to including more high-density tungsten carbide than other TiCo blends--and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.
With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.
Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.
As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.
This industrial saw blade is backed by Freud's limited lifetime warranty.
About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.
By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.
What's in the Box
Freud LU79R007 Ultimate Thin Kerf Plywood and Melamine Saw Blade--7-inch diameter, 5/8-inch arbor, 60-tooth design.
 |
Irwin 24030 Marathon 7-1/4-Inch 24 Tooth ATB Framing and Ripping Saw Blade with 5/8-Inch and Diamond Knockout Arbor Review
Freud D1244X Diablo 12-Inch 44 Tooth ATB General Purpose Miter Saw Blade with 1-Inch Arbor Review
 |
 |
|
Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1244X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1244X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter Saws
The Freud D1244X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and sliding miter saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1244X Diablo 12-Inch General Purpose Saw Blade.
Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri metal shock resistant brazing for stronger carbide teeth.
No. D0824X: 8 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor
No. D0840X: 8 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor
No. D0860S: 8 1 2'' diameter, 60T, 5 8'' round and diamond knockout arbor
No. D1024X: 10'' diameter, 24T, 5 8'' round arbor
No. D1040X: 10'' diameter, 40T, 5 8'' round arbor
No. D1040A: 10'' diameter, 40T, 5 8'' round arbor
No. D1050X: 10'' diameter, 50T, 5 8'' round arbor
No. D1060X: 10'' diameter, 60T, 5 8'' round arbor
No. D1080X: 10'' diameter, 80T, 5 8'' round arbor
No. D1244X: 12'' diameter, 44T, 1'' round arbor
No. D1280X: 12'' diameter, 80T, 1'' round arbor
No. D1040W: 10 1 4'' diameter, 40T, diamond knockout arbor,
No. D1632X: 16 5 16'' diameter, 32T, 1'' round arbor,
No. D1660X: 16 5 16'' diameter, 60T, 1'' round arbor, , Mesquite
