Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor Review

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor Feature

• 20° Face Hook for easy feed
• DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
• Ends second-step finishing (jointing and sanding not required).
• Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
• Ends cutting 1/16" oversize to allow for RESURFACING

Maintain maximum stability for the best cut with a Forrest Chopmaster Saw Blade. Specially designed for sliding compound miter and radial-arm saws, grabbing and throwing of scrap cutoffs has been minimized with this design.This blade has a heavier than normal steel plate and a negative face hook. Its made with double-hard C-4 submicron carbide for up to 300 longer life. Each blade is hand-straightened to a runout of .001"/.002" for maximum cut quality The tooth style (4 points and flat) produces steady, clean cuts with no bottom splintering. Youll be delighted by the extra smooth, tight cuts youll get with this blade. The 10" blade has a 7/64" kerf and 5/8" arbor hole.

Freud LU74R012 12-Inch 96-Tooth ATB Thin-Kerf Cut-Off Saw Blade with 1-Inch Arbor and PermaShield Coating

Freud LU74R012 12-Inch 96-Tooth ATB Thin-Kerf Cut-Off Saw Blade with 1-Inch Arbor and PermaShield Coating Review

Freud LU74R012 12-Inch 96-Tooth ATB Thin-Kerf Cut-Off Saw Blade with 1-Inch Arbor and PermaShield Coating Feature

• Laser-cut bodies for accurate cuts
• Freud micrograin carbide for long life
• Anti-vibration vents for stability
• Perma-shield coating to resist heat
• Thin kerf design to increase machine performance

A versatile addition to your work kit, the 12-inch Freud LU74R012 Thin Kerf Cut-Off Saw Blade offers easy feeding, reduced waste, and the ability to achieve glass-smooth finishes with underpowered saws. Featuring 96 teeth with alternating top bevels and TiCo high-density carbide tips, a unique side-grind setup that polishes material as you cut through it, and Freud's insulating, anti-stick Perma-SHIELD coating, this blade is built to deliver top results over the long haul.

LU74R012 Thin Kerf Ultimate Cut-Off Saw Blade At a Glance: Ideal for smooth crosscuts in materials that are 1/4 to 1-5/8 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-Shield coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 12" Teeth 96 ATB Arbor 1" Kerf (K) .091 Plate (P) .071

Depth of Cut

Unique Side Grind polishes the material to produce a superior finish Thin Kerf allows for easier feeding and reduced waste

Alternating-Top-Bevel Teeth Combine with Unique Side-Grind for Smooth Finishes
This thin-kerf blade's 96-tooth alternating-top-bevel (ATB) configuration features teeth that face both left and right--a versatile setup that's ideal for crosscuts and general use. And thanks to unique side-grinding technology, the blade produces glass smooth surfaces when crosscutting hard- and softwoods. It's a strong pick for miter box applications, and because thin kerf blades remove less material than standard carbide blades, they require less horsepower to produce smooth, accurate results when cutting.

This blade is designed for optimal performance when cutting materials that are 1/4 to 1-5/8 inches thick, including hard- and softwood, chipboard, and plywood. The blade can also handle ripping and working with laminate, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.091 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This thin-kerf saw blade's 96 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "crosscut blend." Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard--due to more high-density tungsten carbide than other TiCo blends--and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU74R012 Thin Kerf Cut Off Saw Blade with Perma-SHIEL--12-inch diameter, 1-inch arbor, 96-tooth design.

This blade produces a fine finish when crosscutting in exotic hardwoods, soft woods, and moldings. The larger blades are ideal for miter box applications. Thin-kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. Application: ultimate crosscutting blades for a glass-smooth finished with underpowered saws

DeWalt DW3128P5 Series 20 12-Inch 80 Tooth & 12-inch 32T ATB Thin Kerf Crosscutting Miter Saw Blade with 1-Inch Arbor, 2 Pack

DeWalt DW3128P5 Series 20 12-Inch 80 Tooth & 12-inch 32T ATB Thin Kerf Crosscutting Miter Saw Blade with 1-Inch Arbor, 2 Pack Review

DeWalt DW3128P5 Series 20 12-Inch 80 Tooth & 12-inch 32T ATB Thin Kerf Crosscutting Miter Saw Blade with 1-Inch Arbor, 2 Pack Feature

• Tougher tungsten carbide stays sharper longer
• Thin kerf for fast and smooth cutting action
• Computer balanced plate reduces vibration for improved accuracy and better finish
• One blade with 80 teeth and one with 32 teeth for added versatility
• Backed by a 3-year limited warranty

Whether you're cutting hardwood, softwood, plywood, or chipboard, the DeWalt DW3128P5 12-inch miter saw blade set helps you make quick, smooth, and accurate cuts. Featuring two thin kerf, carbide blades, one with 80 teeth and one with 32 teeth, this set gives you a pair of great options. Both blades feature a wedge shoulder design that puts an increased amount of steel behind each blade tip to prevent breakage and ensure precision, along with a computer-balanced plate that acts to reduce vibration for a better feel and finish. These blades are built for use with miter saws and slide miter saws.

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor Review

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor Feature

• This kerf saw saves 1/3 on wood loss for each cut
• Feeds easily when used for moderate rips and crosscuts on a table saw
• Reduces jump in for better pull control
• Eliminates bottom splintering on radial crosscuts
• The new 30-degree ATB tooth style stops the blade totally

Forrest Premium Carbide Saw Blades cut cleaner, more efficiently, and last longer between sharpenings than almost any other blade.They feature super hard, long life micro-grain carbide teeth on laser-cut plates that are hand-straightened to a maximum runout of .002". These top quality blades rip and crosscut super smooth and tear-out free. All are 10" diameter and fit 5/8" arbors. Made in the USA, the Woodworker II ATB blade is the most popular for general table saw use. It has a plate thickness of .090, and the kerf is 1/8". If most of your cutting is stock 1-1/2" or thicker, Forrest recommends its 30-tooth blade (#85N53).

Irwin 11270 Master 10-Inch 80 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor

Irwin 11270 Master 10-Inch 80 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor Review

Irwin 11270 Master 10-Inch 80 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor Feature

• Precision ground teeth for smooth, accurate cuts
• Fully hardened plate runs truer longer
• Heavy gauge high carbon steel for extended life
• 5/8" Arbor

Laser cut blade and anti vibration vents. Metal cutting grade carbide teeth. Anti kickback tooth shoulder. Universal 5/8'' arbor.

SE 3" Professional Quality Adj. Jewelers Saw Frame & Blades

SE 3" Professional Quality Adj. Jewelers Saw Frame & Blades Review

Jewelers Saw Frame and 12 Intricate Cutting Saw Blades This Jewelers saw set includes an adjustable 6" saw frame plus 12 intricate cutting saw blades This Jewelers saw set is ideal for cutting jewelry chain, wood, thin metal sheet, fiber glass etc This Jewelers saw set is made with strong metal frame for strength and agility This Jewelers saw set comes with carved and polished wooden handle for comfortable and secured grip This Jewelers saw set features thin and tough blades for intricate cut This Jewelers saw set approximately measures 6" x 2 1/2" NOTE: picture for illustration purpose only, item design and appearance may differ from pictures shown

Skil 75348 7-Inch and 7-1/4-Inch All Purpose Saw Blade Combo Pack with 7-Inch Metal Cut-Off Blade, 7-Inch Masonry Cut-Off Blade, 7-1/4-Inch 150 Tooth Blade, and 7-1/4-Inch 24 Tooth Blade

Skil 75348 7-Inch and 7-1/4-Inch All Purpose Saw Blade Combo Pack with 7-Inch Metal Cut-Off Blade, 7-Inch Masonry Cut-Off Blade, 7-1/4-Inch 150 Tooth Blade, and 7-1/4-Inch 24 Tooth Blade Review

Skil 75348 7-Inch and 7-1/4-Inch All Purpose Saw Blade Combo Pack with 7-Inch Metal Cut-Off Blade, 7-Inch Masonry Cut-Off Blade, 7-1/4-Inch 150 Tooth Blade, and 7-1/4-Inch 24 Tooth Blade Feature

• 24T Carbide Blade is ideal for ripping and crosscutting
• 150T steel blade for fine finishing and plywood
• Abrasive wheels can cut through masonry and metal
• Set includes durable nylon pouch
• Fits all 7 1/4" circ saws with 5/8" arbor

Founded in 1924 as the Michel Electric Handsaw Company and renamed Skilsaw, Inc. in 1926, SKIL has become one of the most recognized and powerful brands in the power tool industry. From circular saws and jigsaws to sanders and drills, SKIL power tools are engineered to deliver the high-performance and durability that today's growing population of Do-It-Yourselfers demand. Every product of the growing line of SKIL tools is the result of extensive end-user research, consumer input, computer assisted design and rigorous testing, both in our laboratories and in the field. SKIL Power Tools are products of the Robert Bosch Tool Corporation.

Robert Larson 540-7500 Coping Saw Blades for Wood

Robert Larson 540-7500 Coping Saw Blades for Wood Review

Robert Larson 540-7500 Coping Saw Blades for Wood Feature

• Pack of 12 blades
• Quality blades from Germany
• For cutting wood

High quality coping saw blades with pinned ends. Fits most coping saws old or new.

Diablo D0641X 6-1/2 by 40 Finishing Saw Blade 5/8-Inch Arbor

Diablo D0641X 6-1/2 by 40 Finishing Saw Blade 5/8-Inch Arbor Review

Diablo D0641X 6-1/2 by 40 Finishing Saw Blade 5/8-Inch Arbor Feature

• Ultra thin kerf design equals fast and effortless cuts and Freud's TiCo Hi-Density carbide for extreme durability and cutting life up to 4 times longer than standard carbide
• Perma-Shield Coating for less drag, gumming and corrosion
• Cuts Like a Hot Knife Through Butter
• Laser Cut Stablilizer vents for less vibration and quiter cleaner cuts
• Tri-Metal Shock Resistant Brazing to withstand exteme impact

Diablo's super thin kerf saw blades effortlessly slice though materials to provide you with clean cuts every time. Ultra thin kerf design equals fast and effortless cuts and Freud's TiCo Hi-Density carbide for extreme durability and cutting life up to 4 times longer than standard carbide. Combine this with Perma-Shield Coating for less drag, gumming and corrosion, Laser Cut Stablilizer vents for less vibration and quieter cleaner cuts and Tri-Metal Shock Resistant Brazing to withstand exteme impact and you have a saw blade that "Cuts Like a Hot Knife Through Butter". 6-1/2-Inch diameter, 40t wood finishing blade ATB and 5/8-Inch arbor with diamond twist out.

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack.

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack. Review

Versa-Tool MB3A3B3C3D1H1I1J Universal Oscillating Saw Blade Kit. 15 Piece, 7 Blade Type Variety Pack. Feature

• For use with Fein, CRAFTSMAN, Chicago Electric and more, see description for tool compatibility list
• Thick gauge metals and high quality manufacturing techniques insure superior wear tolerance and life
• Universal arbor allows multiple position settings for slip free operation at varying blade angles
• Contractors pack, profession selection of top blades used in job site construction duties
• Pack of 15 accessories, stock your toolbox and get the best per blade price

MB3A3B3C3D1H1I1J Blade kit includes 15 pieces of 7 blade types. 3 Pack Versa-Tool 2-1/2-inch wood cutting saw blades ideal for flush cuts and cut-outs in hard, non metallic materials such as hardwoods, plywood and particle board this wood blade can also tackle materials such as plastics, fiberglass and Plexiglas. 3 Pack Versa-Tool 1-3/8-Inch precision Japan saw blades ideal for flush cuts and cut-outs for switches, outlets, hardwood floors, base boards, trim and molding. 3 pack Versa-Tool 1-3/8-inch Bi-Metal saw blades ideal for demolition, plumbing, remodeling and general wood and metal cutting. The Versa-Tool Bi-Metal oscillating saw blade cuts nail embedded wood, fiberglass, tubing, PVC, copper Pipe, metal mesh and sheet metal. 3 Pack Versa-Tool 1-3/8-Inch wood cutting saw blades ideal for flush cuts and cut-outs in hard, non metallic materials such as hardwoods, plywood and particle board this wood blade can also tackle materials such as plastics, fiberglass and Plexiglas. 3 Inch saw blade assortment, 3 types. Type 1: Full 3 Inch design -The circular design allows greater control and stability while ripping and cutting materials. Type 2: Semi-circular design - Allows the blade to cut into corners and 90 degree angles without making unsightly over cuts. Type 3: depressed flush cut arbor - Sits flat and allows precise cuts in difficult cutting situations. The Versa-Tool universal arbor system is compatible with the following brands. Fein Multimaster (All models including FMM250Q, 250, MSx 315 and all models featuring 3/8 inch round arbors), CRAFTSMAN, Chicago Electric, Tool Mate, Power Craft, SECCO, HTC-87, EINHELL, Top Craft, Artwork, MEEC Tools, Man Power, Millarco prof, Westfalia, Falke, Ferm Zwolle Holland, Cougar, Rock Worth, B&Q, Counstructor, Duro, Work Best, Matrix, Pro-Line, Ideenshop, Driving Force, LongActive, VOSS. The Versa-Tool universal arbor system is not compatible with Bosch, DREMEL, Sonicrafter, or Supercut.

DEWALT Bare-Tool DC330B 18-Volt Cordless Jig Saw with Keyless Blade Change

DEWALT Bare-Tool DC330B 18-Volt Cordless Jig Saw with Keyless Blade Change Review

DEWALT Bare-Tool DC330B 18-Volt Cordless Jig Saw with Keyless Blade Change Feature

• All-metal lever-action keyless blade change allows for quick and easy blade changes
• All-metal keyless shoe bevel with detents at 0 degree, 15 degree, 30 degree and 45 degree provides versatility for easy bevel cutting
• 4-position orbital action provides control of cut quality and speed
• Adjustable dust blower, anti-slip comfort grip, variable speed
• Tool only, no battery included

With the DEWALT DC330B 18-volt cordless jigsaw, you don't have to sacrifice power and performance for cordless convenience. The professional-quality DC330B has a variable-speed, high-performance motor that's driven by an 18-volt battery (not included).

4-position orbital action provides control of cut quality and speed (view larger).

DC330B 18-Volt Cordless Jigsaw At a Glance: All-metal lever-action keyless blade change keyless shoe bevel with detents at 0, 15, 30, and 45 degrees 4-position orbital action for good cut quality control Bare tool--doesn't include battery or charger Three-year limited warranty; one-year free service

Power and Performance

With a speed range of 0-3,000 strokes per minute (SPM), the DC330B will cut straight and curves through virtually any building material, including solid wood, plywood, laminate countertops, plastic, metal, even nail-embedded wood. The all-metal keyless shoe bevel features detents at 0, 15, 30, and 45 degrees, providing versatility for easy bevel cutting. And it's packed full of professional features, including a full 1-inch blade stroke length, keyless lever-action blade clamp for easy blade changes, and a four-position, orbital-action switch that lets you match the cut quality and speed to the material.

Comfort and Convenience

The DC330B has a top-handle design for enhanced comfort and control, and it's complemented by an anti-slip comfort grip. An adjustable blower keeps the cut line clear of chips. This jigsaw weighs 5.1 pounds.

Bare Tool

This DEWALT cordless tool does not come with a battery or charger. It's compatible with the DC9096 18-volt XRP battery pack and DW9117 15-minute charger.

Warranty

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.

What's in the Box

One DEWALT DC330B 18-volt cordless jigsaw and operating instructions (batteries and charger sold separately).

All-metal keyless shoe bevel with detents at 0, 15, 30, and 45 degrees provides versatility for easy bevel cutting (view larger).

The DeWalt DC330 is an 18V heavy-duty XRP cordless jig saw. The jig saw consists of keyless blade change system that accepts universal and t-shank blades. The tool free adjustable shoe slides forward, backward and bevels 45 degrees in both directions. It has a 3-position orbital action with unique counter-balance mechanism. The jig saw has a variable speed trigger from 0-2000 SPM for greater control and faster cutting. A dust blower keeps line of cut clear of chips. This is the tool only, with no battery and no additional includes.

Oshlun SBW-065040 6-1/2-Inch 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch Arbor (Diamond Knockout)

Oshlun SBW-065040 6-1/2-Inch 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch Arbor (Diamond Knockout) Review

Oshlun SBW-065040 6-1/2-Inch 40 Tooth ATB Finishing and Framing Saw Blade with 5/8-Inch Arbor (Diamond Knockout) Feature

• Super thin kerf for fast cuts
• Professional grade carbide
• Heat vents for cooler operation
• Anti-kickback tooth design
• Expansion slots to prevent warping

Our finishing and framing blades have been designed for the cleanest cutting of all types of hardwood, softwood, particle board and plywood with various portable saws. They feature a super thin kerf, an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cutSuper thin kerf for fast cutsProfessional grade carbideHeat vents for cooler operationAnti-kickback tooth designExpansion slots to prevent warping

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Super thin laser cut kerf gives extremely fast, durable, and clean cuts
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
• Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
• Tri-Metal Brazing for impact-resistant tips

For a clean-cutting blade that creates smooth finish cuts in material such as veneer plywood and delicate hardwood, look no further than the D1060X Diablo 10-Inch Fine-Finish Saw Blade. This is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. This blade's high tooth count minimizes grabbing of the workpiece, producing cuts that require little to no sanding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Model # D1060X Diameter 10" Machine Use Miter Saw, Table Saw Application Fine-Finish Teeth 60 Hi-ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean Finish Cuts in Wood and Delicate Molding
Achieving attractive results when working with fine finish material is all about clean, accurate cuts. The Freud D1060X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making smooth crosscuts in fine finish work. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1060X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 60 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1060X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1060X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1060X Diablo 10-Inch Fine-Finish Saw Blade.
10" x 60 Tooth, Diablo Fine Finish Blade, Red Perma Shield Coating, Stabilizer Vents, Carbide Tipped, Thin Kerf Design.