Freud LU92M012 12-Inch 72 Tooth Modified TCG Ultimate Laminate Cutting Saw Blade with 1-Inch Arbor

Freud LU92M012 12-Inch 72 Tooth Modified TCG Ultimate Laminate Cutting Saw Blade with 1-Inch Arbor Review

Freud LU92M012 12-Inch 72 Tooth Modified TCG Ultimate Laminate Cutting Saw Blade with 1-Inch Arbor Feature

• 12 inch, 72TPI, MTCG, 1 inch arbor
• Ultimate laminate blade for corian, melamine, lamintaes
• Each tooth has modified triple chip grind
• Zips through solid surface or single & double laminates
• Chip-free finish

The 12-inch Freud LU92M012 Thick Stock Laminate Cutting Saw Blade is a heavy-duty production blade designed to make smooth, chip-free cuts when working with thick laminates and melamine. It features a modified, application-specific, triple-chip tooth grind, the long-term dependability of TiCo high-density carbide, and the anti-friction performance of Freud's Silver I.C.E. coating.

LU92M012 Thick Stock Laminate Cutting Saw Blade At a Glance: Ideal for single- and double-sided laminates, melamine, and stacks of 3/4-inch manmade materials Heavy-duty plate with laser-cut, anti-vibration slots Silver I.C.E. coating reduces friction and prevents gumming Technical Specs: Coating Silver ICE Diameter 12" Teeth 72 MTCG Arbor 1" Kerf (K) .126 Plate (P) .087

Depth of Cut

Modified Triple Chip Grind (MTCG) Tooth Design for long life and chipfree cuts in thick stock manmade materials Negative Hook Angle minimizes chipping in laminates and melamine

Special Grind and Negative Hook Angle for Chip-Free Laminates
Built to leave a high-quality, chip-free finish on both the top and the bottom of thick laminates and melamine, this blade features 72 teeth with a special, modified, triple-chip grind. Based on the results of extensive computer simulations, this grind is ideally suited to working with thick stock and stacks of single- or double-sided laminates. The blade's teeth also feature 6-degree, negative hook angles, which helps prevent the blade from being too aggressive and further reduces the possibility of chipping.

This blade is designed for optimal performance when cutting stacks of 3/4-inch laminates and melamine, and it's also an excellent performer in plywood and chipboard. This blade can also crosscut or rip wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.126 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This thick-stock saw blade's 72 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "laminate blend." Formulated to extend tooth life in the face of work with laminates, melamine, and solid surfaces, this blend is extra hard--due to the proportion of high-density tungsten carbide that goes into it--and it still offers the mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.

Silver I.C.E. Coating Resists Corrosion, Heat, and Resin Buildup
This blade is finished with Freud's Silver I.C.E. coating, which resists corrosion for improved performance over time. This unique coating also resists heat buildup, protecting your saw and your work surface and preventing the blade from warping. It also helps prevent resin or "pitch" buildup.

Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup means longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU92M012 Thick Stock Laminate Cutting Saw Blade--12-inch diameter, 1-inch arbor, 72-tooth design.

This heavy-duty production blade produces an excellent finish on the top and bottom of thick laminates and melamines.LU92M series is ideal for cutting stacked 3/4" laminates and melamines.tooth has a special modified triple chip grind design created by computer simulation to breeze through thick stock and single or double-sides laminates, leaving a chip-free edge. Application: Long Life, Production Blades For Single-Sided Laminates And Stacked Chipboard