Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor Review

Forrest CM10806105 Chopmaster 10-Inch 80 Tooth ATBR Miter and Radial Saw Blade with 5/8-Inch Arbor Feature

• 20° Face Hook for easy feed
• DOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.
• Ends second-step finishing (jointing and sanding not required).
• Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).
• Ends cutting 1/16" oversize to allow for RESURFACING

Maintain maximum stability for the best cut with a Forrest Chopmaster Saw Blade. Specially designed for sliding compound miter and radial-arm saws, grabbing and throwing of scrap cutoffs has been minimized with this design.This blade has a heavier than normal steel plate and a negative face hook. Its made with double-hard C-4 submicron carbide for up to 300 longer life. Each blade is hand-straightened to a runout of .001"/.002" for maximum cut quality The tooth style (4 points and flat) produces steady, clean cuts with no bottom splintering. Youll be delighted by the extra smooth, tight cuts youll get with this blade. The 10" blade has a 7/64" kerf and 5/8" arbor hole.

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor Review

Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor Feature

• This kerf saw saves 1/3 on wood loss for each cut
• Feeds easily when used for moderate rips and crosscuts on a table saw
• Reduces jump in for better pull control
• Eliminates bottom splintering on radial crosscuts
• The new 30-degree ATB tooth style stops the blade totally

Forrest Premium Carbide Saw Blades cut cleaner, more efficiently, and last longer between sharpenings than almost any other blade.They feature super hard, long life micro-grain carbide teeth on laser-cut plates that are hand-straightened to a maximum runout of .002". These top quality blades rip and crosscut super smooth and tear-out free. All are 10" diameter and fit 5/8" arbors. Made in the USA, the Woodworker II ATB blade is the most popular for general table saw use. It has a plate thickness of .090, and the kerf is 1/8". If most of your cutting is stock 1-1/2" or thicker, Forrest recommends its 30-tooth blade (#85N53).

Irwin 11270 Master 10-Inch 80 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor

Irwin 11270 Master 10-Inch 80 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor Review

Irwin 11270 Master 10-Inch 80 Tooth ATB Combination Saw Blade with 5/8-Inch Arbor Feature

• Precision ground teeth for smooth, accurate cuts
• Fully hardened plate runs truer longer
• Heavy gauge high carbon steel for extended life
• 5/8" Arbor

Laser cut blade and anti vibration vents. Metal cutting grade carbide teeth. Anti kickback tooth shoulder. Universal 5/8'' arbor.

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud D1060X Diablo 10-Inch 60 Tooth ATB Fine Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Super thin laser cut kerf gives extremely fast, durable, and clean cuts
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
• Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
• Tri-Metal Brazing for impact-resistant tips

For a clean-cutting blade that creates smooth finish cuts in material such as veneer plywood and delicate hardwood, look no further than the D1060X Diablo 10-Inch Fine-Finish Saw Blade. This is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. This blade's high tooth count minimizes grabbing of the workpiece, producing cuts that require little to no sanding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Model # D1060X Diameter 10" Machine Use Miter Saw, Table Saw Application Fine-Finish Teeth 60 Hi-ATB (Alternate-Top Bevel) Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean Finish Cuts in Wood and Delicate Molding
Achieving attractive results when working with fine finish material is all about clean, accurate cuts. The Freud D1060X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making smooth crosscuts in fine finish work. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1060X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 60 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1060X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1060X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1060X Diablo 10-Inch Fine-Finish Saw Blade.
10" x 60 Tooth, Diablo Fine Finish Blade, Red Perma Shield Coating, Stabilizer Vents, Carbide Tipped, Thin Kerf Design.

Oshlun BAW-100060 10-Inch 60 Tooth Builder's Ace Finishing ATB Saw Blade with 5/8-Inch Arbor

Oshlun BAW-100060 10-Inch 60 Tooth Builder's Ace Finishing ATB Saw Blade with 5/8-Inch Arbor Review

Oshlun BAW-100060 10-Inch 60 Tooth Builder's Ace Finishing ATB Saw Blade with 5/8-Inch Arbor Feature

• Thin kerf for fast cuts
• Construction grade C-2 carbide
• Aggressive hook angle
• Precision ground carbide tips
• Alternate top bevel grind

Our Builder’s Ace Series blades were designed for quality cuts at an affordable price. They feature C-2 tungsten carbide tips, expansion slots, and a thin kerf for faster cutting. Your best inexpensive blade option.Thin kerf for fast cutsConstruction grade C-2 carbideAggressive hook anglePrecision ground carbide tipsAlternate top bevel grind

Freud LU97M010 10-Inch 80 Tooth TCG Double Sided Laminate and Melamine Cutting Saw Blade with 5/8-Inch Arbor

Freud LU97M010 10-Inch 80 Tooth TCG Double Sided Laminate and Melamine Cutting Saw Blade with 5/8-Inch Arbor Review

Freud LU97M010 10-Inch 80 Tooth TCG Double Sided Laminate and Melamine Cutting Saw Blade with 5/8-Inch Arbor Feature

• Micro grain carbide for razor sharp cuts
• Precision ground arbor for accurate cuts
• Triple chip tooth design for chip free cuts
• Laser cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
• Laser cut blade plate

The 10-inch Freud LU97M010 Double Sided Laminate and Melamine Cutting Saw Bladeis designed to make quick, smooth, chip-free cuts when working with laminates, melamine, and veneered plywood. It features Freud's anti-friction Silver I.C.E. coating, and a triple-chip tooth grind, the long-term dependability of TiCo high-density carbide, and a series of laser-cut, anti-vibration slots.

LU97M010 Double Sided Laminate and Melamine Cutting Saw Blade At a Glance: Ideal for double-sided laminates, melamine, and veneered plywood from 1/4 to 1-5/8 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Silver I.C.E. coating reduces friction and prevents gumming Technical Specs: Coating Silver ICE Diameter 10" Teeth 80 TCG Arbor 5/8" Kerf (K) .126 Plate (P) .087

Depth of Cut

Triple Chip Grind (TCG) Tooth Design with a negative hook angle for superior life in abrasive man-made materials Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the wood extending blade life and giving a crisp, splinter-free flawless finish

Triple-Chip Grind for Chip-Free Top and Bottom Surfaces
Built to leave a high-quality, chip-free finish on both the top and the bottom of double-sided laminates and sheets of melamine, this blade features 80 teeth with a triple-chip grind. The blade's teeth also feature positive hook angles for longer tooth life in production applications. And this blade is so effective that there's no need to use a scoring blade with it.

This blade is designed for optimal performance when cutting laminate or melamine that ranges from 1/4 to 1-5/8 inches in thickness. It's also a solid performer when crosscutting wood or working with plywood and chipboard that's less than 1-inch thick. This blade can even rip wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.126 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This laminate saw blade's 80 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "laminate blend." Formulated to extend tooth life in the face of work with laminates, melamine, and solid surfaces, this blend is extra hard--due to the proportion of high-density tungsten carbide that goes into it--and it still offers the mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.

Silver I.C.E. Coating Resists Corrosion, Heat, and Resin Buildup
This blade is finished with Freud's Silver I.C.E. coating, which resists corrosion for improved performance over time. This unique coating also resists heat buildup, protecting your saw and your work surface and preventing the blade from warping. It also helps prevent resin or "pitch" buildup.

Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup means longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU97M010 Double Sided Laminate and Melamine Cutting Saw Blade--10-inch diameter, 5/8-inch arbor, 80-tooth design.

Designed to give long life and excellent finish on the top and bottom of laminates, melamines & veneered plywood.laser-cut anti-vibration design yields the plate acoustically dead.reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates.dramatically extends cutting life and finish.scoring blades needed with this blade! Application: For Ultra Long Life In Double Sided Manmade Materials

Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud LU85R010 10-Inch 80 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Unique side grind polishes the material to produce a superior finish
• Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
• Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud Industrial Blades
Freud’s industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming -- which prolongs the life of the blade.

About this 10-Inch 80-Tooth ATB Ultimate Cut-Off Saw Blade
This exceptional 10-inch, 80-tooth blade is truly worth the extra expense. The LU85R010 from Freud displays impressive engineering and features that makes it today's popular choice for woodworkers. The MicroGrain carbide/titanium tips stay sharp longer; the laser-cut body helps keep the hard steel blade flat and true; Tri-Metal Brazing prevents cracks and failed joints; and the anti-kickback design ensures safer operation. This blade cuts great, runs quietly and always performs chatter-free. It's Teflon-coated to reduce friction and heat buildup -- and it’s protected against rust, corrosion, and resin buildup, too. You might even want to use this blade to coax a better performance out of older or underpowered saws.

Applications
This 10-inch, 80-tooth blade is designed to make sharp, thin kerf cuts on hard and soft woods.

Warranty
Freud blades are covered by a limited lifetime guarantee. This superior carbide-tipped blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. It also minimizes tear-out. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as the blade cuts. With a finish this perfect you wont need stabilizers! New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades. 5/8" arbor .116 kerf

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• 10-inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
• Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
• Heat expansion slots let blade expand due to heat build-up; durable micrograin titanium carbide
• Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
• Laser cut arbor for accurate blade rotation reducing vibration and premature wear

For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Model # D1080X Diameter 10" Machine Use Miter/Slide Miter Saw, Table Saw Application Finishing Teeth 80 Hi-ATB Arbor 5/8" Kerf .098" Hook Angle 15°

Makes Clean, Chip-Free Cuts in Delicate Finish Work
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1080X is a great addition to your workshop because it's designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud's Limited Lifetime Warranty.

What's in the Box
Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.
FREUD SAW BLADE *10" *80T *5/8" arbor *Ultra finish cut *Super thin laser cut kerf *"Red" Perma-Shield coated *Laser cut stabilizer vents *Laser cut heat expansion slots

DEWALT DW3106P5 2 Blade 10-Inch 60-Tooth Crosscutting Saw Blade and 10-Inch 32-Tooth General Purpose Saw Blade Combo Pack

DEWALT DW3106P5 2 Blade 10-Inch 60-Tooth Crosscutting Saw Blade and 10-Inch 32-Tooth General Purpose Saw Blade Combo Pack Review

DEWALT DW3106P5 2 Blade 10-Inch 60-Tooth Crosscutting Saw Blade and 10-Inch 32-Tooth General Purpose Saw Blade Combo Pack Feature

• Tougher tungsten carbide stays sharper longer
• Thin kerf for fast and smooth cutting action
• Computer-balanced plate reduces vibration for improved accuracy and better finish
• Durable tungsten carbide maintains true edge
• Best used for miter saw and slide miter saw jobs

The DEWALT DW3106P5 saw blade combination pack contains a 10-inch DW3106 60-tooth fine-finish blade and a DW3103 32-tooth general purpose saw blade. Perfect for miter saw and slide miter saw jobs with softwood, hardwood, chipboard, and plywood, these slim-kerf blades offer quick and even incisions with minimum excess debris. A patent wedge shoulder places additional steel in back of every tip, maximizing strength and precision. Get the cutting action you need at the right price with this heavy-duty combination pack.

Freud LM74R010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Freud LM74R010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

Freud LM74R010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Feature

• An excellent saw blade for the finish cut on hardwood and softwood
• Thick MicroGrain carbide tips allow for more cuts between sharpening
• Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut
• Non-stick Perma-Shield coating reduces gumming, rusting, and corrosion
• Limited lifetime warranty

The Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain carbide with titanium, called TiCo -- a combination of titanium and cobalt. Freud develops different types of carbide for each application to maximize the cutting life and performance of the tool; and Freud also operates one of the most modern product development research centers in Europe. By overseeing the entire manufacturing process from start to finish, Freud guarantees some of the highest quality, most advanced products in the industry.

About Freud Industrial Blades
Freud’s industrial series blades were designed for the serious woodworker. Available in a variety of styles for different applications, LU blades feature thick carbide tips, precision-tensioned bodies found in every Freud quality blade. Some LU blades include a red Teflon coating that helps reduce friction, heat build-up, and gumming -- which prolongs the life of the blade.

About the 10-Inch 30-Tooth TCG Glue Line Ripping Saw Blade
Freud's LM74R blade has specially designed triple chip grind (TCG) teeth to produce extremely smooth glue line rips in hard and soft woods from 1/8 to 1 inch thick. This blade's Laser-cut anti-vibration slots drastically reduce vibration and sideways movement while extending blade life, and its thick MicroGrain carbide tips allow for more cuts between sharpening. The non-stick Perma-Shield coating reduces gumming, rusting, and corrosion for longer life with less wear.

Applications
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud’s unique side grinding technology. It removes less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Key Technical Specs

• Thick MicroGrain carbide tips
• Laser-cut anti-vibration slots
• Non-stick Perma-Shield coating
• 5/8-inch arbor

Warranty
This blade is covered by Freud's limited lifetime warranty. This Freud blades specially designed triple-chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser-cut anti-vibration slots that practically eliminate the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. .118 kerf 5/8" arbor